Printing & Converting (ink, paper dust, adhesive)
Textiles (fibre, lint, static-attracting fabrics)
Plastics & Packaging (film, granule dust)
Woodworking & Powder Handling (heavy particulate)
Electronics & ESD-Sensitive Manufacturing (cleanroom)
Automotive (paint booths, plastic trim lines)
Food & Beverage (sugar, flour, powder)
Pharmaceutical & Medical (cleanroom, sterile environments)
Use the nylon brush to sweep loose surface dust from the emitter pins and bar body.
Apply the FÖGE Cleaning Solution directly onto the bar surface, or onto a clean lint-free cloth.
Gently work the solution into the emitter pin area with the brush, using light strokes along the pin rows.
Wipe the surface with a clean lint-free cloth to remove loosened contamination.
Repeat steps 2–4 as necessary until all contamination is removed.
Use a dry cloth to polish the pins and bar body to a clean finish.
Allow to air dry completely before reconnecting power.
Printing & Converting (ink, paper dust, adhesive)
Textiles (fibre, lint, static-attracting fabrics)
Plastics & Packaging (film, granule dust)
Woodworking & Powder Handling (heavy particulate)
Electronics & ESD-Sensitive Manufacturing (cleanroom)
Automotive (paint booths, plastic trim lines)
Food & Beverage (sugar, flour, powder)
Pharmaceutical & Medical (cleanroom, sterile environments)
Use the nylon brush to sweep loose surface dust from the emitter pins and bar body.
Apply the FÖGE Cleaning Solution directly onto the bar surface, or onto a clean lint-free cloth.
Gently work the solution into the emitter pin area with the brush, using light strokes along the pin rows.
Wipe the surface with a clean lint-free cloth to remove loosened contamination.
Repeat steps 2–4 as necessary until all contamination is removed.
Use a dry cloth to polish the pins and bar body to a clean finish.
Allow to air dry completely before reconnecting power.
Without cleaning, contaminated pins generate weaker, less stable ion output — reducing the bar's ability to neutralise static and leading to increased defect rates on the production line.
Dust and conductive particles on emitter pins can create electrical bridges between pins, causing arcing, overloading the ionisation circuit or triggering short circuits that damage the bar permanently.
A bar cleaned regularly can operate for years without hardware replacement. A neglected bar may fail prematurely — requiring costly emergency replacement and unplanned production downtime.
A clean ioniser maintains uniform ion distribution across its full width — ensuring consistent static neutralisation on every part, every cycle.
Use the nylon brush to sweep loose surface dust from the emitter pins and bar body.
Apply the FÖGE Cleaning Solution directly onto the bar surface, or onto a clean lint-free cloth.
Gently work the solution into the emitter pin area with the brush, using light strokes along the pin rows.
Wipe the surface with a clean lint-free cloth to remove loosened contamination.
Repeat steps 2–4 as necessary until all contamination is removed.
Use a dry cloth to polish the pins and bar body to a clean finish.
Allow to air dry completely before reconnecting power.
| Components / Features | Advantages |
|---|---|
| Cleaning solution | Water-free and non-conductive — safe for all electrical components |
| Cleaning solution | Special antistatic formulation — removes carbon, ink, fabric residue and airborne dust |
| Cleaning solution | Evaporates cleanly — no residue, no rinsing required |
| Cleaning solution | Compatible with all FÖGE AC and DC antistatic bars, blowers, airguns and nozzles |
| Nylon brush | High-quality filament bristles — cleans emitter pins gently without causing surface damage |
| Nylon brush | Ergonomic, durable handle — comfortable control in confined spaces along bar bodies |
| Nylon brush | Designed for tight access around pin arrays and bar housings |
| Maintains peak | Maintains peak ionisation output between scheduled service intervals |
| Reduces risk | Reduces risk of arcing, short circuits and premature equipment failure |
| Universal maintenance | Universal maintenance solution for the entire FÖGE antistatic product range |
| Environment / Usage | Recommended Cleaning Frequency |
|---|---|
| Heavy dust — textile, woodworking, powder handling | Weekly or more frequently — inspect pins every few days |
| Printing and converting — ink, paper dust, adhesive | Weekly — after each production run if heavy contamination |
| Plastics and packaging — film, granules, static charge | Every 2 weeks — monitor pin colour for contamination build-up |
| General manufacturing — mixed materials | Monthly — or whenever ionisation performance visibly declines |
| Electronics and cleanroom environments | Monthly to quarterly — low contamination risk |
| After any production incident | Immediately — especially after ink spill, dust cloud or unusual static behaviour |
| Product code | Color | Dimensions (mm) | Power Consumption | Wavelength | Datasheet |
|---|---|---|---|---|---|
|
VL-BAL-25-400-R-24-C30 |
Red |
25 x 400 |
– |
621nm |
Download |
|
VL-BAL-25-400-W-24-C30 |
White |
25 x 400 |
– |
6500K |
Download |
|
VL-BAL-25-400-G-24-C30 |
Green |
25 x 400 |
– |
528nm |
Download |
|
VL-BAL-25-400-B-24-C30 |
Blue |
25 x 400 |
– |
470nm |
Download |
|
VL-BAL-25-400-I-24-C30 |
Infrared |
25 x 400 |
– |
940nm |
Download |
|
VL-BAL-25-500-R-24-C30 |
Red |
25 x 400 |
– |
621nm |
Download |
| Product model | Description |
|---|---|
| SE-ACB-55 | Compact AC Antistatic Bar 5.5 kV |
| SE-ACB-80 | High Power AC Antistatic Bar 8 kV |
| SE-DCB-90 | Pulsed DC Antistatic Bar 9 kV |
| SE-DCB-110 | Pulsed DC Antistatic Bar 11 kV |
| SE-DCA-110 | Pulsed DC Antistatic Bar with Compressed Air 11 kV |
| SE-ACG | Antistatic Airgun |
| SE-ACIN-55 | AC Inline Air Ioniser |
| SE-ACS-55-50 | Compact Antistatic Spot Nozzle |
| SE-ARN-80 | Ionising Ring |
| SE-BLC-F-75-C | Compact Ionising Blower |
| SE-BLL | Laminar Air Blower Ioniser |
| Other products | All other FÖGE AC and DC antistatic ionising products |
Handheld non-contact surface charge measurement up to 200 kV — two auto-selected ranges, polarity display, hold function
Centralised 5.5 kV or 8 kV AC power for up to 4 FÖGE antistatic bars and ionisers — compact, short-circuit protected, plug-and-play
Compact 9 kV pulsed DC static elimination — no HV transformer, 24 V DC supply, up to 300 mm range
Air-assisted AC ionisation up to 400 mm — for 3D parts, wide-gap installations and demanding high-speed lines
High-speed, compact static elimination for industrial production lines
Extended-range, high-speed static elimination for demanding industrial production lines
