image 1 (2)
image 1 (2)

SE-DCB-110 Pulsed DC Antistatic Bar — 11 kV

Long-range static elimination up to 600 mm — 11 kV pulsed DC, 24 V DC supply, no HV transformer
SE-DCB-90:110
SE-DCB-90:110
SE-DCL-110_Dimensions (1)
SE-DCB-110_Applications

Product Description

The FÖGE SE-DCB-110 is a compact, high-power 11 kV pulsed DC antistatic bar designed for long-range static elimination in demanding industrial environments. Operating directly from a 24 V DC supply (SE-PSU-24-C-M12, sold separately), it generates its 11 kV ionisation voltage internally — eliminating the need for external high-voltage transformers, HV cabling and the safety zones they require. With an effective ionisation range of up to 600 mm, the SE-DCB-110 reaches significantly further than standard short-range bars, making it the right choice for film winding and unwinding systems, labelling and converting lines, injection mould entry areas, robotic arm installations and any application where the bar must be positioned well away from the target surface. The SE-DCB-110 uses balanced alternating pulsed DC ionisation — continuously switching between positive and negative ion output to neutralise both charge polarities rapidly and completely. Shockless tungsten emitter pins deliver consistent ion output with extreme service life and minimal maintenance. An integrated LED indicator provides instant operational status feedback, and an M12 5-pin industrial connector ensures reliable connection in tough production environments. The bar can be ordered in any length from 300 mm to 4500 mm to cover the full width of any target zone.

Industries

Plastics & Film (winding, extrusion, converting)
Printing & Converting
Packaging (labelling, laminating, slitting)
Pharmaceutical & Medical Devices
Electronics & ESD-Sensitive Assembly
Automotive (plastic components, large panels)
Robotics & Industrial Automation
11 kV pulsed DC ionisation — generated internally from 24 V DC; no external HV transformer or HV cabling required
Ionisation range up to 600 mm — designed for long-range applications where standard bars cannot reach
Orderable in any length from 300 mm to 4500 mm
24 V DC supply — simple, safe installation; connects to SE-PSU-24-C-M12 adapter (sold separately)
No compressed air required — passive ionising bar
Shockless design — tungsten emitter pins, safe for operators
Balanced alternating pulsed DC — fast, complete neutralisation of positive and negative charges
Integrated LED status indicator — power and operational status at a glance
M12, 5-pin industrial connector — robust, reliable connection; cable ordered separately
Industrial-grade, impact-resistant housing — suitable for continuous-duty production environments
Request a Quote
Download Datasheet

Product Description

The FÖGE SE-DCB-110 is a compact, high-power 11 kV pulsed DC antistatic bar designed for long-range static elimination in demanding industrial environments. Operating directly from a 24 V DC supply (SE-PSU-24-C-M12, sold separately), it generates its 11 kV ionisation voltage internally — eliminating the need for external high-voltage transformers, HV cabling and the safety zones they require. With an effective ionisation range of up to 600 mm, the SE-DCB-110 reaches significantly further than standard short-range bars, making it the right choice for film winding and unwinding systems, labelling and converting lines, injection mould entry areas, robotic arm installations and any application where the bar must be positioned well away from the target surface. The SE-DCB-110 uses balanced alternating pulsed DC ionisation — continuously switching between positive and negative ion output to neutralise both charge polarities rapidly and completely. Shockless tungsten emitter pins deliver consistent ion output with extreme service life and minimal maintenance. An integrated LED indicator provides instant operational status feedback, and an M12 5-pin industrial connector ensures reliable connection in tough production environments. The bar can be ordered in any length from 300 mm to 4500 mm to cover the full width of any target zone.

Industries

Plastics & Film (winding, extrusion, converting)
Printing & Converting
Packaging (labelling, laminating, slitting)
Pharmaceutical & Medical Devices
Electronics & ESD-Sensitive Assembly
Automotive (plastic components, large panels)
Robotics & Industrial Automation
11 kV pulsed DC ionisation — generated internally from 24 V DC; no external HV transformer or HV cabling required
Ionisation range up to 600 mm — designed for long-range applications where standard bars cannot reach
Orderable in any length from 300 mm to 4500 mm
24 V DC supply — simple, safe installation; connects to SE-PSU-24-C-M12 adapter (sold separately)
No compressed air required — passive ionising bar
Shockless design — tungsten emitter pins, safe for operators
Balanced alternating pulsed DC — fast, complete neutralisation of positive and negative charges
Integrated LED status indicator — power and operational status at a glance
M12, 5-pin industrial connector — robust, reliable connection; cable ordered separately
Industrial-grade, impact-resistant housing — suitable for continuous-duty production environments
Request a Quote
Download Datasheet
SE-DCB-90:110

How It Works

The SE-DCB-110 connects to a 24 V DC supply via an M12 connector cable. Internally, the bar's pulsed DC high-voltage circuit converts the 24 V input to 11 kV, which is applied continuously to the row of tungsten emitter pins. The high voltage causes intense ionisation of the air around each pin, generating a dense cloud of positive and negative ions. The circuit continuously alternates between positive and negative high-voltage pulses — ensuring the ion output is balanced and that both charge polarities on the target surface are neutralised. The ions drift outward from the bar toward the target, with the higher 11 kV voltage generating a denser, more energetic ion field that reaches further than lower-voltage bars — achieving effective static neutralisation at distances up to 600 mm. The shockless design keeps pin current at a safe level for operators at all times.
Request a Quote
Download Datasheet

Advantages & Benefits

01

600 mm long-range ionisation without HV

The SE-DCB-110 achieves 600 mm ionisation range using its 11 kV internal output — without the HV transformers, cable runs and safety exclusion zones that traditional long-range HV bars require.

02

No HV infrastructure

The 11 kV output is generated inside the bar from a standard 24 V DC supply. The installation footprint is identical to any other 24 V industrial device — no dedicated transformer rooms or HV-rated conduit.

03

No compressed air

Unlike air-assisted bars such as the SE-DCA-110, the SE-DCB-110 reaches 600 mm without any compressed air supply — reducing infrastructure cost and installation complexity at the machine.

04

Fast, balanced static neutralisation

The alternating pulsed DC circuit continuously switches polarity, neutralising positive and negative charges simultaneously and preventing charge re-accumulation on the target surface.

05

Easy OEM integration and retrofit

The compact 24 V DC format, standard M12 connector and wide length range (300–4500 mm) make the SE-DCB-110 straightforward to specify in new machine builds and retrofit into existing lines.

06

Low maintenance

Tungsten emitter pins have an extreme service life. No air filters, no air components, and the sealed industrial housing requires no special cleaning procedures.

SE-DCB-90:110

Key Features

11 kV pulsed DC ionisation — generated internally from 24 V DC; no external HV transformer or HV cabling required
Ionisation range up to 600 mm — designed for long-range applications where standard bars cannot reach
Orderable in any length from 300 mm to 4500 mm
24 V DC supply — simple, safe installation; connects to SE-PSU-24-C-M12 adapter (sold separately)
No compressed air required — passive ionising bar
Shockless design — tungsten emitter pins, safe for operators
Balanced alternating pulsed DC — fast, complete neutralisation of positive and negative charges
Integrated LED status indicator — power and operational status at a glance
M12, 5-pin industrial connector — robust, reliable connection; cable ordered separately
Industrial-grade, impact-resistant housing — suitable for continuous-duty production environments
Request a Quote
Download Datasheet

Which Product to Choose — SE-DCB-110, SE-DCB-90 or SE-DCA-110

All three products operate from 24 V DC with no external HV power unit. Use the table below to select the best fit for your ionisation range and installation requirements:
Comparison SE-DCB-110 (this product) SE-DCB-90 SE-DCA-110
Voltage 11 kV Pulsed DC 9 kV Pulsed DC 11 kV Pulsed DC + compressed air
Range Up to 600 mm Up to 300 mm Up to 1000 mm
Air Required No No Yes — 2 bar min.
Category Long Range Short Range Long Range
Length Range 300 – 4500 mm 200 – 4500 mm 300 – 2000 mm
Best For Film wrapping, labeling, converting, robotics
- long reach without air		 Conveyors, containers, pressure
- Medium range without air		 Wrapping, forming, conveyors
- Maximum reach with compressed air

Applications

Applications Where it helps
Film Winders & Unwinders Neutralize static electricity on plastic films and sheets during winding and unwinding at intervals of up to 600 mm
—for installation configurations that require a large gap between the rod and the film.
Labelling & Laminating Lines Eliminate static electricity on labels, films, and substrates before and during lamination and labeling
— prevent misalignment, adhesion failures, and contamination.
Converting Lines Control static on paper, film, foil and board webs during slitting, rewinding and converting
— ensuring clean cuts, accurate tension and consistent static-free surfaces throughout.
Injection Mould Entry Zones Position the bar at the mould entry to neutralise charge on plastic parts as they leave the mould
— preventing dust attraction on freshly moulded surfaces at the point of part ejection.
Robotic Arm Installations Mounted on robotic arms or fixed frames in automated handling cells
— Long-range ionization of parts in varying positions.
Digital Printing & Slitting Systems Neutralise static on substrates before and during digital printing and slitting
— preventing ink smear, misalignment and dust attraction on the print head or cutting edge.

Technical Specifications

Product code Color Dimensions (mm) Power Consumption Wavelength Datasheet
VL-BAL-25-400-R-24-C30
Red
25 x 400
–
621nm
Download
VL-BAL-25-400-W-24-C30
White
25 x 400
–
6500K
Download
VL-BAL-25-400-G-24-C30
Green
25 x 400
–
528nm
Download
VL-BAL-25-400-B-24-C30
Blue
25 x 400
–
470nm
Download
VL-BAL-25-400-I-24-C30
Infrared
25 x 400
–
940nm
Download
VL-BAL-25-500-R-24-C30
Red
25 x 400
–
621nm
Download

Parameter

Specification

  1. Product code
    SE-DCB-110-xxxx (Length in mm, e.g. SE-DCB-110-0600 = 600 mm)
  2. Power adapter (sold separately)
    SE-PSU-24-C-M12 (220 V AC to 24 V DC)
  3. Ionisation type
    Pulsed DC – shock-free
  4. Ionization output voltage
    11 kV pulsed DC
  5. Operating Voltage
    24 V DC (21 – 28 V) · 0,5 A max.
  6. Ionisation Range
    Up to 600 mm *
  7. Ordering Length
    300 – 4500 mm (special lengths on request)
  8. Emitter-Pin-Material
    Tungsten – extremely long service life
  9. Polarity
    AC pulse current – ​​balanced ion yield
  10. Connector
    M12, 5-Pin (order cable separately)
  11. Status Indicator
    Integrated LED – Operating and energy status
  12. Operating temperature
    0 – 50 °C
  13. Maximum humidity
    70 % rH
  14. Housing
    Industrial quality, impact resistant
  15. EMC compliance
    2014/30/EU – EMC Directive
  16. Electrical safety
    2014/35/EU – Low Voltage Directive
* Ionisation range measured under standard conditions (20 °C, 50 % rH). Effective range may vary with ambient humidity, temperature and line speed.

Do you have any questions about this product?

Name *
Phone number *
Email *
Are you interested in several products?
Geben Sie hier die Namen weiterer Produkte ein, an denen Sie interessiert sind:
Please write down your questions about the product.

Complete System — What You Need

Components Description
SE-DCB-110 bar (specify length) Ionising bar — order in required length (300–4500 mm). Example: SE-DCB-110-0600 = 600 mm
SE-PSU-24-C-M12 power supply 220 V AC to 24 V DC adapter — required to power the bar · sold separately
M12 5-pin cable Industrial M12 connection cable — length to suit installation · sold separately
Mounting brackets (optional) Standard and custom brackets — contact FÖGE for options
Maintenance kit (optional) FÖGE Antistatic Maintenance Kit — cleaning tools and spare tungsten emitter pins

Frequently Asked Questions

No. The bar generates its 11 kV ionisation voltage internally from a 24 V DC supply. The SE-PSU-24-C-M12 adapter (220 V AC to 24 V DC) is required and sold separately — but no external HV transformer, HV cabling or HV safety zones are needed.
Both are passive pulsed DC bars with 24 V DC supply and no compressed air requirement. The SE-DCB-110 operates at 11 kV and reaches up to 600 mm. The SE-DCB-90 operates at 9 kV and reaches up to 300 mm. Choose SE-DCB-110 when your installation geometry or material position requires a longer working distance.
Both operate at 11 kV from 24 V DC with the same connector, but the SE-DCA-110 uses integrated compressed air to carry ions up to 1000 mm. The SE-DCB-110 is a passive bar (no air) with a 600 mm range. Choose SE-DCB-110 where compressed air is not available or not wanted; choose SE-DCA-110 where maximum range of 1000 mm is required.
The bar should span at least the full width of the material or zone to be neutralised. The SE-DCB-110 is orderable from 300 mm to 4500 mm. Contact FÖGE with your required length when placing an order.
No. The SE-DCB-110 achieves its 600 mm range through its 11 kV passive ionisation — no compressed air infrastructure is needed at the installation point.
Yes. The compact 24 V DC design, M12 industrial connector and absence of external HV components make the SE-DCB-110 well suited for robotic arm mounting and integration into automated handling cells.

Related Products

Discover complementary products that boost performance and integrate seamlessly into your system.
SFM (1)

SE-SFM-030 Static Electric Fieldmeter

Handheld non-contact surface charge measurement up to 200 kV — two auto-selected ranges, polarity display, hold function

PAC (1)

SE-PAC AC High Voltage Power Unit

Centralised 5.5 kV or 8 kV AC power for up to 4 FÖGE antistatic bars and ionisers — compact, short-circuit protected, plug-and-play

SE-DCB-90:110

SE-DCB-90 Pulsed DC Antistatic Bar — 9 kV

Compact 9 kV pulsed DC static elimination — no HV transformer, 24 V DC supply, up to 300 mm range

ACA

SE-ACA Long Range AC Antistatic Bar with Air

Air-assisted AC ionisation up to 400 mm — for 3D parts, wide-gap installations and demanding high-speed lines

ACB

SE-ACB-55 Compact AC Antistatic Bar – 5.5 kV

High-speed, compact static elimination for industrial production lines

SE-ACB-55

SE-ACB-80 High Power AC Antistatic Bar – 8 kV

Extended-range, high-speed static elimination for demanding industrial production lines